Monday, September 21, 2009

Calling all Sony Ericsson HBH-IS800 ...

Have any of you updated to the latest 3.1 iPhone firmware? If so, does the volume control problem still exist with the HBH-IS800?

Orignal From: Calling all Sony Ericsson HBH-IS800 ...

Bluetooth

I was wondering if anybody knows whether or not the phone can support both stereo bluetooth and regular stereo plugs at the same time. Allowing 2 people to listen to the same audio/video/etc without using the speaker. Essentially one wired and one wireless connection receiving the same audio output. It doesn't seem to be supported simultaneously, but certainly seems like something that could be done in a patch or App.

Thanks for any info.

Orignal From: Bluetooth

Sunday, September 20, 2009

Will 3.0 or 3GS work with bluetooth ...

Will 3.0 or 3GS work with bluetooth headphones? If yes which headphones do you suggest?

Orignal From: Will 3.0 or 3GS work with bluetooth ...

iPhone 3G S and Sony Ericsson HBH-IS800 ...

I just started evaluating the Sony Ericsson HBH-IS800 headset. It looks promising with its ultra-compact size and decent sound quality.

However, I am having a major issue with the headset. It does not have volume control built in, meaning volume must be controlled on the iPhone. However, using the volume switch on the side of the iPhone does not work when it is paired with the HBH-IS800 (or any other BT headset, for that matter). It seems to contradict with Apple's following KB article.

http://support.apple.com/kb/HT1840

Does anyone have any idea what I may be doing wrong? Any help would be appreciated.

Orignal From: iPhone 3G S and Sony Ericsson HBH-IS800 ...

iPhone 3G Using A2DP

Hello,

I just upgraded mu iPhone 3G to 3.0 and am planning on replacing some older wired Shure earbuds to Bluetooth Stereo.

Does anyone yet have an idea of expected battery life of the iPhone when streaming audio over bluetooth? If it kills the battery, then I am really not all that interested.

Also - does anyone know which is better - the Moto S9 HD or the Jaybird JB 200?

Thanks!

Orignal From: iPhone 3G Using A2DP

3G S , bluetooth volume, and Jawbone ...

Has anyone else noticed a significant difference in the volume of a Jawbone or any other headset/earset since upgrading to 3G S?

Just upgraded from 16GB 3G to 32GB 3G S today and after turning volume all the way up on my Jawbone from iPhone and earset, I am noticing volumes much less than on the older device. At times it is a struggle to hear the voice at all...

Orignal From: 3G S , bluetooth volume, and Jawbone ...

No Delay in Audio on One Particular ...

Last time I posted about how I am finding about a one second delay of the audio relative to the video using the iPhone 3Gs and Motorola S9 headset. The consensus was that there was an unavoidable delay inherent in the A2DP system, some buffereing going on, and that this system was not good for watching movies. I thought that sounded reasonable UNTIL I watched a particular piano concert on my iPhone using my S9. The audio was synced perfectly to the video...no delay whatsoever. For all the other videos stored on my iPhone, the audio and video are synced fine using the iPhone speaker, but there is a one second delay using my S9. For this one video, no delay. What is going on here? Any ideas?

Orignal From: No Delay in Audio on One Particular ...

iPhone 3.0 A2DP Distortion Using ...

I purchased a Kensington Bluetooth Car Kit for my wife (the one with the aux output) so that she could use her iPhone in her car. The was just after the 3.0 software was revealed, so I also purchased a Sony iPod Bluetooth Adapter so that she could pair the iPhone to the car kit for both phone and music. It worked ok, except that the music would get distorted sometime, and sometimes it worked perfectly. I assumed that it was because I was using an adapter, and thought the problem would be resolved once the 3.0 software was released.

So after updating her iPhone yesterday, we ran out to her car and tried it, only to find that there was now always distortion! It paired quickly, and everything seems to work fine. The distortion is most evident on iTunes Plus tracks (not so much on lower quality tracks, though its still there). Is there some setting that needs to be changed in order to get the music to play without distortion? Is this a limitation of the hardware?

Additional info: Calls sound fine, as does internet radio, though they are of noticeably lower quality than the iTunes.

Orignal From: iPhone 3.0 A2DP Distortion Using ...

Jabra BT8040/Jabra BT620 - Audio delay ...

In anything whether it be keypad tones, games audios, pocket guitar or movies, there seems to be a delay. I dont really mind except when watching videos.

When listening via cabled headset, there is no problem, but when we use Bluetooth A2DP, everything is out of Sync..

Is there any solution to this?

Orignal From: Jabra BT8040/Jabra BT620 - Audio delay ...

Any In-ear BLUETOOTH earphones FULLY ...

Been waiting for iPhone 3.1 and the fuller support for Bluetooth. It seems like we're getting there. I use the Apple In-Ear Headphones and while in my opinion the sound quality is marginally inferior to the old-style in-ear headphones (without the controller) - yes, I was the one person who loved those - Voiceover, call control, pause, skip, rewind, volume etc. are great features which I don't want to give up. The other compelling avantage is that the controller is very small, something the other manufacturers don't seem to think is important.

But, I hate the cable. I hate that I have to thread it under a shirt due to the noise. I hate that it catches on things, yanking the buds out of my ears violently.

I have searched and searched but right now do any Bluetooth in-ear phones exist that fully replicate the functionality obtainable with the wired Apple in-ear phones?

Orignal From: Any In-ear BLUETOOTH earphones FULLY ...

Kensington Bluetooth Headphones with ...

My headphones still work with the iPhone OS 3.1. But a problem occurs with I try to stop a song with the headphones.

Usually, double tapping the Play/Pause button (on the left side) stops and rewinds the song (not pauses).

But with 3.1, double tapping said button only pauses the song. And to replay the song, I have to manually go on my iPod Touch, and press the rewind button.

This is the only thing to stop working since the upgrade to 3.1. Although, I never got the previous/next buttons to work with my iTouch.

Orignal From: Kensington Bluetooth Headphones with ...

Track skipping in OS 3.1 ...

Apple just deleted this thread.

Summary:
Question: can you skip tracks finally in OS 3.1 like you can with every other BT phone on the planet?
Answer: No. Nor can you adjust volume with the phone volume buttons. AVRCP still a fail.

Orignal From: Track skipping in OS 3.1 ...

Phillips SHB7100: Iphone: No audio ...

Heya

I am able to pair the two items.
Able to control the stops/start function but no audio.

tested the unit with my Imac,it works fine,but i need to enable the option listen thru Headset.

So is there any such setting in the Iphone setting?

Orignal From: Phillips SHB7100: Iphone: No audio ...

iphone 3GS with bluetooth connection ...

I connected my iphone 3GS to my Audi car system through bluetooth connection. The Audi system recognizes the iphone and his address phone and all works well.
The issue comes when I disconnect the iphone from the car kit. After, even someone calls me, the call ringtone rings only two times and after switches off during the incoming call. This issue is random, sometimes the alarm rings well, sometimes not by working in the way described above. Someone has the same issue and knows how solve it? Is an issue linked to hw or only sw?

thanks

Message was edited by: IGK

Orignal From: iphone 3GS with bluetooth connection ...

Plantronics Voyager 520 ...

My iPhone 3G worked fine with this headset (Plantronics Voyager 520)
Now my iPhone 3GS won't even pair with it.
Both Phones running v 3.0.
I don't really want to spend another hundred bucks on new
headsets.
What's up.
Big Mac fan ... Kinda ****** by this.

JC

Orignal From: Plantronics Voyager 520 ...

Sennheiser VMX 100 Erratic on 3GS ...

I have a Sennheiser VMX 100 Bluetooth Headset purchased at the Apple store last year that is very erratic with my 3GS. It pairs and connects but the audio is intermittent and the bluetooth icon frequently flashes trying to reconnect then the audio just drops out altogether. It worked fine on my 3G. My older Motorola HS820 works fine on both phones. Is anybody else experiencing this problem.

Orignal From: Sennheiser VMX 100 Erratic on 3GS ...

3.1 Killed BMW bluetooth. ...

Hey Guys: 2009 BMW iPhone pre 3.1 worked like a charm.
Vehicle recognized iPhone w/o having to do anything.... (once paired of course.)

Now (3.1) it is paired but no connection is established....
Stinks.

Any help would be much appreciated.
Thanks in advance.
Oh, and I've already deleted Bluetooth on both iPhone and BMW and repaired. It shows as a successful pair but spins endlessly trying to connect.

Orignal From: 3.1 Killed BMW bluetooth. ...

iPhone 3G/ 3.0 locks up with Lexus ...

After upgrading to 3.0, my iPhone 3G locks up about 30% of the time when either I turn on or turn off my 2008 Lexus LX-350. The phone just sits with a dark screen and needs to be re-booted- then works OK. The issue never happened before the 3.0 upgrade. Any thoughts?

Orignal From: iPhone 3G/ 3.0 locks up with Lexus ...

Audio stuttering when on Bluetooth page ...

Hi, I have a iTech BluebandR stereo bluetooth headset. It is able to pair and connect to iPhone 3G, and iPhone 3GS. But i found this irritating problem, that is while iPhone is already streaming (via Bluetooth A2DP) to the headset, and I open the bluetooth settings page, I can hear stuttering on the headset.. It is ok again when it is not on the bluetooth setting page. is there anyone has similar issue?

Orignal From: Audio stuttering when on Bluetooth page ...

bluetooth headphones for music and ...

I know Voice Command doesn't work with bluetooth headsets yet but it's supposed to with the new update.

I'm looking for something that has all the controls of my iPhone 3GS wired headset ... but wireless! Nothing too bulky either. Does one exist? Again I want it for music AND for phone functions (answering calls (need microphone), voice command, etc... Also headphones (both ears) not just a one ear headset.

I have a 2 piece pair of Logitech bluetooth headphones that I use with my Macbook (one piece gets plugged into headphone jack) but that won't work with iPhone and is just for music...

Thanks!!!

Orignal From: bluetooth headphones for music and ...

Report: Apple Blue-tooth ear-set/OS ...

I have found the Apple blue-tooth ear-set completely unusable after upgradinmg to iPhone OS3.1. The communication between the blue-tooth and the phone (both ways) breaks up so badly I cannot hear/understand anybody I attempt to speak with and they report a similar experience listening to me.

I have found the problem to completely clear up -if- I turn off Wi-Fi networking. It appears that there is an interference problem. With Wi-Fi turned on I find the blue-tooth connection again unusable.

Anybody else?

Thank You for listening.

Orignal From: Report: Apple Blue-tooth ear-set/OS ...

Bluetooth Headset worked with 1st gen ...

The bluetooth headset (over 4 years old) I was using with my 1st generation iPhone will not be discovered by my 3GS, is there a difference in the bluetooth technology? Is it a possibility that I need to upgrade my bluetooth headset? Any help would be greatly appreciated.

Orignal From: Bluetooth Headset worked with 1st gen ...

Iphone is disappointing? ...

I just bought I phone and I found it very disappointing. I have another cellphone which I will rely on more and ignore the iphone. The bluetooth unaccessability and the complicated way of accessing items via icons (I don't mean the clicking thing but the linking between items comparing to my other phone). It is a mistake that I have to pay for since I have a contract with the network provider regarding this iphone. It is very inappropriate from the company to connect their bluetooth device with their own devices only and not with devices from other companies. What do you think guys, did you face the same problem?

Orignal From: Iphone is disappointing? ...

3.1 Bluetooth bugs? ...

So i am pretty sure this is a bug. My car has bluetooth handsfree and audio streaming built in. 3.0 and 3.0.1 worked just fine - no issues.

With 3.1 - it still works, kinda. No issues streaming audio and you can still make calls. However if you are streaming audio via bluetooth, and make a call from the phone via the bluetooth handsfree - the ring doesn't sound over the bluetooth at all. It seems like the phone is just hanging and not connecting, and just when you are about to say ***, the call connects. It's kind of jarring.

BUT when you are not streaming bluetooth audio - and are listening to the radio or whatever... ring sounds just fine. Additionally - when i dial through the car, ring sounds just fine. In fact - it works just fine with everything but Bluetooth audio. heck you can even swith audio source and actually here it ringing, just not when its on bluetooth audio mode.

Anyone else see this with either a headset or a car? I am thinking this is a bug because the ring sounds properly in every other bluetooth use situation.

have tried restore to new phone, re-pairing, hard restart, all to no avail. i know it worked prior to 3.1

Orignal From: 3.1 Bluetooth bugs? ...

iPhone and Bluetooth with 3.0 ...

what devices can you now connect via bluetooth? is it just headsets? what about car kits etc?

Orignal From: iPhone and Bluetooth with 3.0 ...

Bluetooth stopped working after 3.0 ...

Hi, i have a blue ant car kit and a Nolan helmet with the blue tooth module, before 3.0 they both worked fine, I upgraded to 3.0 and the car kit still works without a problem but the helmet has stopped working, I can force connect it but it wont work and then disconnects itself.
Any ideas?
I rang the importers for Nolan but they said to return it to get it checked out, its not the helmet its the phone so that wont help.

Orignal From: Bluetooth stopped working after 3.0 ...

bluetooth handsfree ...

I have been given a supertooth voice bluetooth handsfree but cant seem to get my phone to conect to it can anyone help . when i search for devices it finds it but will not conect , i had a nokia bluetooth in the car that my old iphone would reconise but my new one will not please help

Orignal From: bluetooth handsfree ...

Motorola S9-HD cannot voice dial with ...

I just picked up the S9-HD's and have a 3G S with 3.1 installed. I Like the headphones a lot and the added voice control is nice but I have a problem voice dialing through the headset. It will dial a contact or phone number but right after I give the command everything goes silent. No sound through the headset but the phone says its connected to the headset. Worse yet, after this happens no sound comes out of the headsets for music or anything. The controls on the headset connect and function but no audio. Is this possibly a phone issue? Tried another S9-HD set and the same thing happened.

Anyone experiencing the same thing?

Thanks

Message was edited by: succisa75

Orignal From: Motorola S9-HD cannot voice dial with ...

Bluetooth Headset is not charging ...

I was not using the Apple Bluetooth headset for a while and it seems to be totally discharged (cannot switch it on)

I put it into the charger but the LED does not show up at all (should be amber).

Is this expensive item already dead? (deep discharged?)

Orignal From: Bluetooth Headset is not charging ...

Sony Ericsson HBH-IS800 - Can't Control ...

I have a Sony Ericsson HBH-IS800 headset; it is pairing and playing OK. However I can

Orignal From: Sony Ericsson HBH-IS800 - Can't Control ...

BT problem with notebk ...

i'm new to iphone... i managed to paired up my BT headset with iphone 3GS, but can never get my iphone to pair with my notebook, i tried with both macbook

Orignal From: BT problem with notebk ...

Blueant V1 and OS 3.0 blue genie voice ...

I have a blueant V1 and voice control worked just fine with os 2.2.1 but after upgrading to 3.0 voice control is now broken. Can anyone else who has a V1 confirm this? This is stupid.

Orignal From: Blueant V1 and OS 3.0 blue genie voice ...

Saturday, September 19, 2009

Acura TSX 2007 - Bluetooth doesn't work ...

I have an Acura TSX 2007. I can't initiate a call from my iPhone 3GS and have it connect via car's bluetooth, even though the iPhone and the car are paired. The call would connect but I can't hear the person on the other end, not through my car's speakers or through the iPhone - unless I give up and switch to "connect via iPhone" and talk on the phone instead.

Strangely, I can effortlessly listen to voice mail using visual voice mail through my car's bluetooth.

The only way I can initiate the call from the car is by tell the car a number to dial, but it's very inconvenient.

Does anyone know how I can initiate a call from the phone and connect it via Acura's bluetooth?

Orignal From: Acura TSX 2007 - Bluetooth doesn't work ...

Could iPhone Headset owners confirm ...

I've been having NO trouble with pairing but CONNECTING after pairing. I think I've solved the problem but wanted to know if other's have the same issue.

I have no problem connecting if:
1] the iPhone is NOT in the dock or
2] if the iPhone IS in the dock but iTunes is NOT open.

But...

If the iPhone IS in the dock and iTunes IS open, the headset refuses to connect.

Can anyone else confirm this behavior?

Orignal From: Could iPhone Headset owners confirm ...

iPhone Bluetooth Headset - VERY low ...

I'm trying to figure out why people don't hear me while I'm using my iPhone Bluetooth Headset with my iPhone 3G.
Volume is on max, I hear everyone else extremely good and very good on half volume, but people barely hear me - I need to yell.

Orignal From: iPhone Bluetooth Headset - VERY low ...

Strange problem with Bluetooth ...

Hi everyone,
I am experiencing a very annoying problem with my Iphone. Since I have it (more or less 2 months) I paired it with my Earphone (Plantronics Discovery 640) with no hassle whatsoever.

Yesterday, I tried to get them to connect for the usual trip to work, and nothing happens anymore. It seems that the iphone doesn't want to connect to the headset.

I have tried to connect the iphone to the computer at work, and the BT antenna of my PC would not even "see" the iphone...

What might have happened? Did someone experience the same issue? Any solutions?

Thanks for the help!

Orignal From: Strange problem with Bluetooth ...

Jabra bt3030 w/iphone 3G s ...

I'm using this. It paired easily and the sound is excellent with my etymotic earphones but I can't get the pause or fast forward and back to work. The volume control works.
Am I doing something wrong? Is there another step I needed to take to get those controls to work?
Thanks.
Pat

Orignal From: Jabra bt3030 w/iphone 3G s ...

Bluetooth stop work ...

Hi, i have a Nolan helmet with the blue tooth module, before 3.0.1 they both worked fine, I upgraded to 3.0.1 and the helmet has stopped working.
The helmet Nolan devices is detected but not connected.
Any ideas?

Orignal From: Bluetooth stop work ...

App to toggle bluetooth on and off? ...

I'm noticing that Bluetooth is eating my battery rather quickly. I don't always have (or even want to use) the Bluetooth headset. I'm looking for an app I can put on the "home page" that when I run it will simply toggle the state of the bluetooth setting between off and on. It's a pain to have to select Home --

Orignal From: App to toggle bluetooth on and off? ...

iPhone and Motorola S9 ...

What is the current solution and the projected solution set to allow the Motorola S9 headset to be used with the iPhone in both the Cell Phone Calling Mode and in the iPod mode?

As of today I am unable to successfully adapt the S9 and the iPhone.

Orignal From: iPhone and Motorola S9 ...

Sony bluetooth car head unit and iphone ...

Hi, I have in my car a Sony BT2500 bluetooth head unit, and my iphone connects to it fine for most of the time, i can take calls and stream music fine....there is just one thing missing?

On my other phones i have had such as nokia and sony ericssons...they all took commands from the head unit for example.

If i pressed pause or wanted to change a track i would use the controls on the head unit and it would change the track i was listing to on the phone, on the iPhone this doesn't happen, all that happens with the iPhone is that the music stops just for a split second when i press any buttons on the head unit the just proceeds to play the same track with no other changes.

Is there a fix for this or is there a way of telling apple as this would be a safer way of changing tracks whilst driving than turning the iphone on then inputting you passcode, in which time you have died a horrible death, as you may crash into the back of the car in front....sorry got carried away there.

Any help whould be great on this, as for me this is the only thing that lets bluetooth down on the iphone.

Thanks

Mark

Orignal From: Sony bluetooth car head unit and iphone ...

iPhone won't connect to UHP Bluetooth ...

Just bought an Apple iPhone and delighted with it. Unfortunately, I cannot get it to work with my Vauxhall Vectra UHP Bluetooth System installed in my car. I can get the iphone to pair up with the car, but it only connects momentarily before disconnecting. My previous handset (Blackberry 8120) worked a treat?
Can I download some sort of patch or driver to cure the problem? or am I just doing it wrong?
Advice greatly appreciated!
Nick Brazier

Orignal From: iPhone won't connect to UHP Bluetooth ...

iPhone 3G Using A2DP

Hello,

I just upgraded mu iPhone 3G to 3.0 and am planning on replacing some older wired Shure earbuds to Bluetooth Stereo.

Does anyone yet have an idea of expected battery life of the iPhone when streaming audio over bluetooth? If it kills the battery, then I am really not all that interested.

Also - does anyone know which is better - the Moto S9 HD or the Jaybird JB 200?

Thanks!

Orignal From: iPhone 3G Using A2DP

Sony HBH-DS970 BlueTooth Can't ...

After upgrading to 3.0, my Sony HBH-DS970 stereo bluetooth works fine with musics and video. However, I could not make or receive call using the bluetooth headset. Any clue?

Orignal From: Sony HBH-DS970 BlueTooth Can't ...

iPhone 3.0 A2DP Distortion Using ...

I purchased a Kensington Bluetooth Car Kit for my wife (the one with the aux output) so that she could use her iPhone in her car. The was just after the 3.0 software was revealed, so I also purchased a Sony iPod Bluetooth Adapter so that she could pair the iPhone to the car kit for both phone and music. It worked ok, except that the music would get distorted sometime, and sometimes it worked perfectly. I assumed that it was because I was using an adapter, and thought the problem would be resolved once the 3.0 software was released.

So after updating her iPhone yesterday, we ran out to her car and tried it, only to find that there was now always distortion! It paired quickly, and everything seems to work fine. The distortion is most evident on iTunes Plus tracks (not so much on lower quality tracks, though its still there). Is there some setting that needs to be changed in order to get the music to play without distortion? Is this a limitation of the hardware?

Additional info: Calls sound fine, as does internet radio, though they are of noticeably lower quality than the iTunes.

Orignal From: iPhone 3.0 A2DP Distortion Using ...

Bluetooth

Hi all, wondering if anyone else is having problems with bluetooth not working? all worked fine until latest os upgrade to os3.0.1. now bluetooth seems to pair but when you go to answer a call is not connected. this is not isolated to any one bluetooth unit,i have tried it with four different units from different manufacturers all with no joy. I like being able to use a bluetooth

Orignal From: Bluetooth

3.0 upgrade gives reciever fo my calls ...

I have had changed phones because the memo on the upgrage to 3.o on my 3G give the reciever of my call a severe echo. I have the same car and it did not happen until I put the upgrade in in June 2009. How do I remove the voice memo from this upgrade because it picks up the callers voice in my hands free bluetooth in my car. The apple store has seen this and that why they gave me a new phone. But I am convinced it is the upgrade. And I am not the only one. So when is the new upgrade comming to solve this problem.

Orignal From: 3.0 upgrade gives reciever fo my calls ...

iPhone 3G bluetooth connection to ...

Since installing OS 3.0 on my iPhone the bluetooth connection to my Oticon hearing aid streamer does not work correctly. Prior to installing OS 3.0, bluetooth connection for the cell phone was good. To hear music from the iPod I used a cable. I am now unable to keep the bluetooth from the iPod turned off. Is there a way to turn off the iPod bluetooth and leave the iPhone bluetooth connection for the cell phone turned on?

Orignal From: iPhone 3G bluetooth connection to ...

Bluetoohn Stereo Headsets in General ...

Everyone in here who is writing you have to first understand that if you have upgraded your iphone to firmware 3.0 YES it will support music streaming, the problem though that appears is that music cuts off....the music cutting off is due to lack of resources available (Memory) available when the music streaming is activated. So everytime you turn on your headsets yes you might have cut offs because you didnt free up some memory by cuting off unwanted programs from running. Guys you have to go in the Settings menu and free availability up so it can stream without a problem.

For those who are having problems pairing your phone with the headset first go to Bluetooth and make sure that when you turn on your headset the bluetooth is not on the list as it should appear.If its there all you need is to connect it...once it says connected....exit and go to the icons first screen... touch the ipod icon...click on any song and if you were succesful you should see a bluetooth bar below the box where you can choose and listen via headphones...if it doesnt appear an you have reset your phone, or if you have shut it down and still doesnt work I would recommend a full backup on your mac or pc then restore the unit to manufacturers settings and update....after all of that then the first thing you want to do is just connect your Bluetooth and see if it works now .....I remember that I needed to restore my unit and update all over in order for the bluetooth to work properly hopefully everything should work fine

Orignal From: Bluetoohn Stereo Headsets in General ...

Apple Bluetooth Headset and Iphone 3Gs, ...

I purchased the Apple Bluetooth headset when I got my first Iphone two years ago. The volume was excellent and that made the headset excellent in a noisy environment such as ones car.

When I upgraded to the 3Gs and paired the headset, I found the volume was not adequate even in a quiet room. I repaired with the old Iphone and it's fine.

So I've waiting for Apple to find and fix this bug! My old Iphone, wife's 3G and my 3Gs all have the newest firmware version 3.0 and the volume is fine with the old iphone. I have not tested on my wife's phone.

Help?

Thanks,
Mike

Orignal From: Apple Bluetooth Headset and Iphone 3Gs, ...

iPhone 3G

I'm a total newbie to my iPhone and I'm wondering if it's possible to get my Dell BH200 BT headset to function with my iPhone 3g.
Any assistance or instructions would be sincerely appreciated

Orignal From: iPhone 3G

Bluetooth Headset too quiet when calling ...

I am using the Bluetooth headset "Plantronics Pulsar 590A" with iPhone 3GS (Firmware 3.0.1). This headset supports headset profile for calling as well as A2DP stereo profile for music listening (see here: http://www.plantronics.com/europe_union/en_GB/products/mobile/bluetooth-headsets/pulsar590a)

When calling other people I can hear them loud and clear, but the people I'm calling always complain that they can't hear me loud enough. It's so quiet that I'm not able to use my headset anymore.

On my old iPhone (1st Gen) there was no problem at all when using the same headset for calling (The stereo music listening was not working on the first iPhone, of course. But I am talking about the headset profile for calling here).

Is Apple aware of this problem? Please fix this annoying bug!

Thanks,

Michael

Orignal From: Bluetooth Headset too quiet when calling ...

Will 3.0 or 3GS work with bluetooth ...

Will 3.0 or 3GS work with bluetooth headphones? If yes which headphones do you suggest?

Orignal From: Will 3.0 or 3GS work with bluetooth ...

iPhone 3G S and Sony Ericsson HBH-IS800 ...

I just started evaluating the Sony Ericsson HBH-IS800 headset. It looks promising with its ultra-compact size and decent sound quality.

However, I am having a major issue with the headset. It does not have volume control built in, meaning volume must be controlled on the iPhone. However, using the volume switch on the side of the iPhone does not work when it is paired with the HBH-IS800 (or any other BT headset, for that matter). It seems to contradict with Apple's following KB article.

http://support.apple.com/kb/HT1840

Does anyone have any idea what I may be doing wrong? Any help would be appreciated.

Orignal From: iPhone 3G S and Sony Ericsson HBH-IS800 ...

No Delay in Audio on One Particular ...

Last time I posted about how I am finding about a one second delay of the audio relative to the video using the iPhone 3Gs and Motorola S9 headset. The consensus was that there was an unavoidable delay inherent in the A2DP system, some buffereing going on, and that this system was not good for watching movies. I thought that sounded reasonable UNTIL I watched a particular piano concert on my iPhone using my S9. The audio was synced perfectly to the video...no delay whatsoever. For all the other videos stored on my iPhone, the audio and video are synced fine using the iPhone speaker, but there is a one second delay using my S9. For this one video, no delay. What is going on here? Any ideas?

Orignal From: No Delay in Audio on One Particular ...

3G S , bluetooth volume, and Jawbone ...

Has anyone else noticed a significant difference in the volume of a Jawbone or any other headset/earset since upgrading to 3G S?

Just upgraded from 16GB 3G to 32GB 3G S today and after turning volume all the way up on my Jawbone from iPhone and earset, I am noticing volumes much less than on the older device. At times it is a struggle to hear the voice at all...

Orignal From: 3G S , bluetooth volume, and Jawbone ...

Jabra BT8040/Jabra BT620 - Audio delay ...

In anything whether it be keypad tones, games audios, pocket guitar or movies, there seems to be a delay. I dont really mind except when watching videos.

When listening via cabled headset, there is no problem, but when we use Bluetooth A2DP, everything is out of Sync..

Is there any solution to this?

Orignal From: Jabra BT8040/Jabra BT620 - Audio delay ...

Kensington Bluetooth Headphones with ...

My headphones still work with the iPhone OS 3.1. But a problem occurs with I try to stop a song with the headphones.

Usually, double tapping the Play/Pause button (on the left side) stops and rewinds the song (not pauses).

But with 3.1, double tapping said button only pauses the song. And to replay the song, I have to manually go on my iPod Touch, and press the rewind button.

This is the only thing to stop working since the upgrade to 3.1. Although, I never got the previous/next buttons to work with my iTouch.

Orignal From: Kensington Bluetooth Headphones with ...

Any In-ear BLUETOOTH earphones FULLY ...

Been waiting for iPhone 3.1 and the fuller support for Bluetooth. It seems like we're getting there. I use the Apple In-Ear Headphones and while in my opinion the sound quality is marginally inferior to the old-style in-ear headphones (without the controller) - yes, I was the one person who loved those - Voiceover, call control, pause, skip, rewind, volume etc. are great features which I don't want to give up. The other compelling avantage is that the controller is very small, something the other manufacturers don't seem to think is important.

But, I hate the cable. I hate that I have to thread it under a shirt due to the noise. I hate that it catches on things, yanking the buds out of my ears violently.

I have searched and searched but right now do any Bluetooth in-ear phones exist that fully replicate the functionality obtainable with the wired Apple in-ear phones?

Orignal From: Any In-ear BLUETOOTH earphones FULLY ...

Track skipping in OS 3.1 ...

Apple just deleted this thread.

Summary:
Question: can you skip tracks finally in OS 3.1 like you can with every other BT phone on the planet?
Answer: No. Nor can you adjust volume with the phone volume buttons. AVRCP still a fail.

Orignal From: Track skipping in OS 3.1 ...

iphone 3GS with bluetooth connection ...

I connected my iphone 3GS to my Audi car system through bluetooth connection. The Audi system recognizes the iphone and his address phone and all works well.
The issue comes when I disconnect the iphone from the car kit. After, even someone calls me, the call ringtone rings only two times and after switches off during the incoming call. This issue is random, sometimes the alarm rings well, sometimes not by working in the way described above. Someone has the same issue and knows how solve it? Is an issue linked to hw or only sw?

thanks

Message was edited by: IGK

Orignal From: iphone 3GS with bluetooth connection ...

Phillips SHB7100: Iphone: No audio ...

Heya

I am able to pair the two items.
Able to control the stops/start function but no audio.

tested the unit with my Imac,it works fine,but i need to enable the option listen thru Headset.

So is there any such setting in the Iphone setting?

Orignal From: Phillips SHB7100: Iphone: No audio ...